LED AV8X+ TIG/MIG/ARC/PLASMA CUT/WATER COOLER SYSTEM.
LED AV8X+ TIG/MIG/ARC/PLASMA CUT WATER COOLED SYSTEM,MIG IS SEPERATED FROM TIG PLASMA AND ARC FOR BETTER EASE OF USE AND A LOT MORE FUNCTIONALITY FOR MIG AND CONTROL.
INCLUDE:
1-AV8X+ MACHINE(2PARTS)
1-THREE WAY VALVE
1-TUNGSTEN
1-TIG TORCH( WATER COOLED)
1-PLASMA TORCH
1-ARC STICK HOLDER
1-MIG SPOOL GUN(SWIVEL WIRE SPOOL CAGE)
1-MIG LINE FEED TORCH(AIR COOLED)
1-GROUND CABLE
1-FOOT PEDAL
1-AIR REGULATOR
2-ARGON REGULATORS
1-WATER COOLER
1-WELDING CART
EXTRA 1 SET (10 INNER 10 OUTTER) PLASMA TIPS & 3 PCS FILLER ROD FOR YOU TO START
Unitary gas shielded arc welding parameters(SYNC MIG)
|
Model Item |
SYNERGY MIG |
|
Rated Amperage |
60-200A |
|
Material selection |
Fe co2,Fe Ar82,AlMg5 Ar AlSi5 Ar,E308 Ar98 |
|
Welding wire diameter |
0.8, 1.0, 1.2 |
|
Operation mode(TRIG) |
2T,4T,S2T,S4T,Spot,Cpot |
|
Inductance(Forc) |
-90% to 50% |
|
Burn-back time(Burn) |
-90% to 90% |
|
Time for spot welding |
0.1-9.9s |
|
Soft starting speed(StFd) |
1-13m |
|
Spot welding stop time(stop) |
0.1-25.5s |
|
Preflow time of gas(Preg) |
0-10s |
|
Postflow time of gas(Post) |
0.1-50s |
Double pulse gas shielded arc welding(Double Pulse)
|
Model Item |
AV8X+ SYNERGY MIG200 |
|
|
Rated Amperage |
200A |
|
|
Material selection |
AlMg5 Ar AlSi5 Ar, |
Fe co2,Fe Ar82, E308 Ar98 |
|
Welding wire diameter |
1.0, 1.2 |
0.8, 1.0 |
|
Operation mode(TRIG) |
2T,4T,S2T,S4T,Spot,Cpot |
|
|
Inductance(Forc) |
-90% to 50% |
|
|
Burn-back time(Burn) |
-90% to 90% |
|
|
Time for spot welding |
0.1-9.9s |
|
|
Pulse frequency(Freq) |
0.5-5.0H |
|
|
Duty ratio (Duty) |
20%-80% |
|
|
Pulse amplitude(Ip-p) |
5%-50% |
|
|
Basic arc length |
-50% TO 50% |
|
|
Peak arc length |
-50% TO 50% |
|
|
Soft starting speed(StFd) |
1-13m |
|
|
Spot welding stop time(stop) |
0.1-25.5s |
|
|
Preflow time of gas(Preg) |
0-10s |
|
|
Postflow time of gas(Post) |
0.1-50s |
|
Single pulse gas shielded arc welding (pulse MIG)
|
Model Item |
AV8X+ SYNERGY MIG |
|
|
Rated Amperage |
200A |
|
|
Material selection |
AlMg5 Ar AlSi5 Ar, |
Fe co2,Fe Ar82, E308 Ar98 |
|
Welding wire diameter |
1.0, 1.2 |
0.8, 1.0 |
|
Operation mode(TRIG) |
2T,4T,S2T,S4T,Spot,Cpot |
|
|
Peak amperage amplitude(Forc) |
-99% to 50% |
|
|
Burn-back time(Burn) |
-90% to 90% |
|
|
Time for spot welding |
0.1-9.9s |
|
|
Soft starting speed(StFd) |
1-13m |
|
|
Spot welding stop time(stop) |
0.1-25.5s |
|
|
Preflow time of gas(Preg) |
0-10s |
|
|
Postflow time of gas(Post) |
0.1-50s |
|
this machine MIGs like AC/DC TIG, Aluminum, SS Steel, Steel, alloys of all kinds. single or double pulse , can adjust it to get the stack dimes look , its amazing truly. can adjust pulse , up slope down slope, inductance, pulse frequency , burn back, hot start end current , to the gas blend using , phone app controllable , record , and we can diagnose the machine over the internet for the settings and such . this is a major break through in MIG welding like and identical to a TIG bead if needed in the job at hand , all other older MIGs will be considered nearly useless after you have used this MIG